EVO 300 Hybrid Intergrated

74 995,00 kr

The Primaluna pre-stage uses the brand’s well known six piece 12AU7 configuration. The Floyd Mosfet power stage uses paired Linear Systems JFETs and 20N20/20P20 Mosfets resulting in a 2 x 100 Watt power rating at 8 Ohm. Where possible, they use hard wiring, and if PCBs are needed, they use the highest quality PCBs available (2.5mm thick instead of the standard 1.6mm), 105um (usually 35um) gold plated copper tracks.

The PrimaLuna pre-stage uses two power supplies (including two separate transformers), while the power stage comes with a single 500VA transformer. The starting point for all the power supplies is our AC Offset Killer circuit. The amplifier comes with six inputs (5 x Line RCA, 1 x HT) and outputs (tape out, stereo/mono sub, headphone and speakers, of course). It arrives with a fully shielded heavy-metal sub-chassis for the optional MM phono stage.


Product Description


Power 8 Ohm >100 Watts per channel (typical 115 Watts)

Power 4 Ohm >150 Watts per channel (typical 170 Watts)

Frequency Response 10 Hz – 80 kHz +/- 3 dB

THD < 0.2% 100W @ 8 Ohm

S/N Ratio -105dB (A-Weighted)

Input Impedance 34 kOhm

Input Sensitivity 415 mV

Total Gain (Pre + Power Amp) 37.2 dB (7dB + 30.2dB)

Power Consumption 99 Watts (no signal in); 645W@4R

Weight Net weight: 59.5 lbs / 29 kg

Shipping Weight: 68.3 lbs / 25 kg

Dimensions 15.9″ x 15.2″ x 8.1″ / 405 x 385 x 205 mm (L x W x H)

Shipping Dimensions 22.7″ x 18.4″ x 12.4″ / 578 x 468 x 316 mm (L x W x H)

Inputs 5 pairs Stereo RCA, 1 pair Home Theater Input

Outputs Speaker Taps, Tape, Stereo/Mono Sub, Headphone

Tube Complement 6 x 12AU7

Damping Factor 160 (1 kHz)

Alla Primaluna produkter kommer med PrimaLuna Silver Label tubes/valves.